VSGL-800/1200A1 全自动UV上光机-SHENZHEN DZENSTAR MACHINERY CO., LTD.

全球专业的印后/包装/纸品加工设备供应商

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

搜索

VSGL-800/1200A1 全自动UV上光机

VSGL-800/1200A1 Automatic UV & Water Base Coating Machine

所属分类：

Product Centre

UV上光机

关键词：

技术参数
产品详细信息
视频

在线留言

商品名称: VSGL-800/1200A1 全自动UV上光机

VSGL-800/1200A1 Automatic UV & Water Base Coating Machine

● 主要技术参数:

型号	VSGL-800A1	VSGL-1200A1	VSGL-1200/1300A1-L
最大纸张尺寸	760×1050 mm	1200×1050 mm	1200×1450 mm / 1300×1650 mm
最小纸张尺寸	270×270 mm	300×300 mm	340×420 mm / 420×500 mm
纸张克重	80~200 g/m²(With EM Air Knife); 200~600 g/m²
速度	8000 PCS/Hour (Thick Paper); 5000 PCS/Hour (Thin Paper)
UV灯管	2PCS×8KW	3PCS×9.75KW	3PCS×9.75KW
红外灯管	18PCS×1.5KW	18PCS×1.5KW	18PCS×1.8KW
功率	45KW	50KW	85KW
重量	6000kg	6500kg	6000kg
外形尺寸	10000×1800×2000mm	11000×2000×2000mm	13000×2200×2000mm
纸堆高度	1100mm
收纸高度	1050mm
胶辊直径	165mm
计量辊直径	118mm
压力辊	138mm
可选规格	可定制尺寸：1200×1450 mm / 1300×1650 mm / 1450×1650 mm.

❈ Features:

Paper pre-stacker，to realize non-stop paper feeding and receiving
High degree of intelligence, one-button start and acceleration, more convenient and efficient than traditional segmented control.
The shaft head is 55mm large, which is more stable and firmer than the traditional 35mm under high speed, without deformation, and good coating effect!
Synchronous belt transmission, the equipment is more stable, no jitter. The surface texture effect will be better in high-end products.
The oil guard has high precision, and it is more difficult for water to enter the bearing than the traditional one.
The air knife is easy to operate! High-precision correction, tight on both sides, no slight soft deformation and damage to the mesh belt.
The whole machine has a one-key acceleration function. After the main machine accelerates, the oven, paper delivery, feeder, and metering roller will all change according to the speed of the main machine.
The metering roller controls the oil thickness, which can be set on the touch screen.

● 用途及特点

　　VSGL-800/1200A1全自动单头UV上光机是在原有三辊上光机的基础上进行技术升级，采用计量辊变频调速，不同厚度纸张的上油量可通过不同的线速度进行控制，操作简单、方便。经本机上光后，不再出现桔皮纹现象，上光制品的表面细腻度因此得到了根本改变，使上光制品达到了最佳效果。整机由自动送纸机、涂布油头、红外线干燥、紫外线干燥及自动收纸5个单元组成，工作单元组合亦可根据客户要求进行调整。

1. 自动送纸机：

　　1) 送纸风头采用免油式真空风泵吸纸系统。

　　2) 风头位置可根据需要进行调整。

　　3) 配纸张重叠控制器、缺纸停机保护装置。

　　4) 送纸台可实现不停机加纸。

2. 涂布油头：

　　1) 涂布主机，配置高度灵敏风刀系统，使厚纸与薄纸顺利上光。

　　2) 卷纸停机保护：当纸张卷上涂布辊后，设备报警并自动停机。

　　3) 配涂布效果及供料多寡之微调控制，以方便用户根据需要作相应调节。

3. 红外线干燥机：

　　1) 红外线干燥设备。

　　2) 热气循环系统。

　　3) 可作水性或溶剂性涂布之后干燥作业。

　　4) 吸风式网状铁氟龙输送带送纸平整。

4. 紫外线干燥机：

　　1) UV紫外线干燥使UV光油硬化，耐磨，纸张表面更加光亮。

　　2) 急速冷却系统避免纸张卷曲。

　　3) 吸风式网状铁氟龙输送带送纸平整。

5. 自动收纸机：

　　1) 皮带低噪音收纸，上下压轨道设计，收纸平稳顺畅。

　　2) 薄纸涂布易生卷曲，真空吸气输送台使纸张输送更加平整。

　　3) 气动拍打收纸，收纸更平整，拍打频率可根据客户需要调节。

1.Automatic Paper Feeder:
1. Adopt high-speed offset press feeder (12000 sheets/hour) to ensure fast and stable operation
2. Paper photoelectric control, automatic lifting
3. Double protection feeder lifting safety
4. Using the latest paper stacker design, the entire tray can be pushed in, and the tray can be pushed in directly after printing, without manual paper sorting. Pre-stacker can also be used. two-way choice. Greatly save paper time and reduce the labor intensity of operators.
2.Powder Cleaning Unit (Optional):
1. This unit is used to clean the residual powder and dust from printing processes.
2. Adopting the water powder removal method, the powder removal efficiency reaches 75% without damaging the paper. The body is made of high-quality cast iron to ensure accuracy.
3. After treated by this unit, paper will be more level and smooth to improve coating quality without scratching the paper surface.
3.UV Coating Section:
1. Using cast iron body, strong rigidity and long life
2. Three-roll reverse coating:
3. A: The thickness of the oil can be controlled by adjusting the metering roller speed to save oil
  
  B: A separate frequency converter controls the reversal of the metering roller, which has more frequency converters, motors, reducers and other configurations than the traditional roll-to-roll coating.
  
  C: Iron roller 130MM adopts chrome-plated mirror surface treatment, rubber roller 165MM adopts 60 degree polyurethane rubber roller. The larger the roller, the thicker the rubber, ensuring fine coating and no orange peel.
4. Equipped with an air knife, it can make 80G thin paper, the size of the wind, and the time of blowing are controlled by PLC.
5. Automatic stop function for roll paper
6. Automatic counting function
7. The rollers are adjusted synchronously, driven by the synchronous belt to make the coating effect stable and great.
8. Equipped with two oil tanks, UV and IR, and equipped with temperature heating control to ensure that the UV oil is coated between 40-60 degrees
9. The gap between the coating roller and the pressure roller of each machine head is adjustable from 0-50mm.
10. The main rollers adopt 55-diameter shaft heads and heavy-duty bearings, which greatly extend the life of the bearings.
11. The diaphragm pump is used for oil supply, no motor is needed, and the operation is safer.
12. Double scrapers and a unique bottom roller automatic cleaning system, double oil pan device, the lower roller is immersed in the small oil pan when working, which can effectively clean the lower roller and prevent the oil from drying during shut down.
4.IR Drying & UV Curing System:
1. The better the leveling of the oven, the stronger the drying and curing.
2. Equipped with UV and IR systems, which are controlled separately and cannot be used at the same time.
3. 27 IR lamps and 3 UV lamps, IR lamps generally have a life of 2 years, UV lamps have a life of 800~1000H, and transformers have a life of more than one year .
4. The UV part adopts 8-12KW adjustable electronic light source, which has greatly improved safety performance than the traditional voltage source light source.The light source can adjust the brightness automatically as the change of machine's running speed, which can be changed from 30% to 100%. Thus the average energy consumption is saved by more than 30%.
5. Emergency stop or overheat protection device, when the emergency stop or the temperature inside exceeds 150 degrees, the protective cover will automatically rise to dissipate heat to prevent fire
6. Equipped with a ventilation system, under the UV curing box, there is a strong suction device composed of an exhaust fan and a wind box, which can extract ozone, dissipate heat and make the paper not easy to curl in the furnace, but can pass smoothly.
7. Equipped with automatic correction system, (double correction, double over-limit protection). The paper conveying adopts the imported Teflon conveyor belt, which can prevent ultraviolet rays, is strong and durable, does not support the paper, the electric eye detects the Teflon conveyor belt, and the automatic homing correction device
8. The whole process of suction to ensure that the coating products will not float and do not pile up paper. The oven is equipped with iron wire protection to prevent the paper from floating on the paper and cause a fire.
5.Cooling System:
1. After the paper dries out, it is quickly air-cooled to make the paper dry faster without anti-sticking
6.Automatic Paper Stacker:
1. Paper photoelectric control, automatic lifting
2. Double protection feeder lifting safety
3. Low noise of belt conveyer adopts the design of top and bottom pressing track to make paper delivery smooth.
4. Air aspirator is equipped to prevent the curvature of thin paper and makes the paper conveyed stably.
5. Pneumatic patting device tidies up paper stack automatically. And patting frequency is adjustable upon application needs.
6. Disorderly paper automatic lowering function

在线留言