SMC-D1100/1500/1700/1900ZH智能伺服精密双螺旋高速片材切割机，带自动拼接机和自动托盘更换机
SMC-D1100/1500/1700/1900ZH智能伺服精密双螺旋高速片材切割机，带自动拼接机和自动托盘更换机
- 技术参数
- 产品详细信息
- 视频 在线留言
-
- 商品名称: SMC-D1100/1500/1700/1900ZH智能伺服精密双螺旋高速片材切割机，带自动拼接机和自动托盘更换机
SMC-D1100/1500/1700/1900ZH智能伺服精密双螺旋高速片材切割机，带自动拼接机和自动托盘更换机
● 主要技术参数:
型号
SMC-D1100ZH
SMC-D1500ZG
SMC-D1700ZG
SMC-D1900ZH
切纸型式
双螺旋刀, 顶部刀片和底部刀片旋转切割
纸张范围
100~1000gsm
100~1000gsm
100~1000gsm
100~1000gsm
切断长度范围
450~1650mm
450~1650mm
450~1650mm
450~1650mm
切断精度
Cutting length≤1000mm: ±0.1mm; Cutting length＞1000mm: ±0.1%
最高切断米数
350m/min
350m/min
350m/min
300m/min
最高切断刀数
440 Cust/min
440 Cust/min
440 Cust/min
380 Cust/min
最大卷筒纸直径
1800mm
1800mm
1800mm
1800mm
最大卷筒纸宽度
1100mm (45”)
1500mm (59”)
1700mm (67”)
1900mm (75”)
最大堆纸高度
1600mm
1600mm
1600mm
1600mm
气压源需求
0.8Mpa
0.8Mpa
0.8Mpa
0.8Mpa
总功率
69KW
82KW
90KW
100KW
电压
3PH-50HZ-AC380V/220V
总重
25,000kgs
27,000kgs
30,000kgs
32,000kgs
备注
实际产量取决于材料，纸张的重量，以及正确的操作过程。
● 切纸速度:
型号
SM-D1100/1500/1700
SM-D1900
切断长度 (mm)
切断米数 (m/min)
裁切刀数 (Cust/min)
切断米数 (m/min)
切断米数 (m/min)
450
125
275
100
210
500
160
315
110
220
550
190
350
135
240
600
210
350
155
260
650
250
380
190
290
700
290
410
230
320
750
330
440
290
385
800
330
410
300
380
850
330
385
300
355
900
330
365
300
345
950
330
350
300
320
1000
330
330
300
300
1050
320
300
300
285
1100
310
280
290
265
1150
300
265
285
250
1200
300
250
280
235
1250
300
240
270
220
1300
300
230
260
210
1350
300
215
260
195
1400
300
210
260
190
1450
300
200
260
180
1500
300
195
260
175
1550
300
190
260
168
1600
300
188
250
160
1650
300
185
250
155
● 地基安装图:
-
● Applications and Characters:
The SMC-D series Smart Servo Precision High Speed Sheet Cutter Machine (Synchro- fly twin knife) can efficiently complete slitting, rip cutting and trimming of products, as well as maintaining the highest precision and product quality.
The SMC-D series Sheet Cutter Machines are well equipped and almost can adapt to all die cutting requirements of products. Paper after cutting is smooth without any powder, can be put on printing machine immediately.
- Adopt nodular cast iron-QT500-7, original paper frame clamp arms casting by special technology process, thus featuring by high strength, never deformation and ensure the safety of original paper frame clamp arms .
- Adopt nodular cast iron-QT600-7, the mainframe wallboard and cutter base has precision manufacturing and high strength , thus will never-deformed .
- The machine uses NSK bearings.
- The machine uses original parts imported from Germany Siemens, Japanese OMRON and Germany Moeller, etc
- Die cutting accuracy reach to ± 0.1mm, the highest speed reaches 440 sheet/min.
- The back cutter is adopt Germany Ni-Cr-Mo metal Tungsten steel material, with high precision and will never- deforms; the knife edge is easy to adjust and calibrate.
- Equipped with the company first-developed anti-curve automatic regulation device, ensure fast and smooth when they adjust of anti-curved paper.
- Paper feeding part adopts pre-pressing device, to ensure that the paper is not wrinkled.
- Equip with touch-screen operation interface in both Chinese and English.
- Adopt Japanese SMC auto tension system and pneumatic components to ensure every pneumatic action performs accurately.
Based on SMC-D series Smart Servo precision Double-helix High Speed Sheet Cutter Machine, this machine equipped with automatic splicer and pallet changer, which enable it realizing fully automatic operation, and embodied the intelligent and efficient technical characteristics of the machine.
❈ Partial Introduction:
Reel Stand, Paper Feeding:
- Max. paper roll diameter: 1800mm
- Max. paper-cutting width: 1100/1500/1700/1900mm
- Min. paper-cutting width : 500mm(20″)
- Paper cylinder diameter: 3″, 6″ or 12″
- Hydraulic drive:
-
Tension control system: Pneumatic tension control and swing roll to adjust the pressure arm rise or fall, to control the strength of brake
5.1 Open/close and forward/backward movement of paper roll clamp arms is driven by oil hydraulic cylinder
5.2 Lifting of paper roll clamp arms is driven by oil hydraulic cylinder
- Pneumatic brake brakes, automatic brakes
- Paper guide roll and relevant brackets
Anti-curve Device:
- Type: Adopt motor drive and high-speed adjustment
-
Anti-curve device: Anti-curve guide roll adopts patented design and efficient anti-curve treatment
Paper Pre-pressing Part:
- Adopt electric control and inching mode, to make the pressing roll moving vertically, ensure proper positioning of feeding paper, and reduce the phenomenon of paper creping.
Auto Positioning Slitting Part:
- Type: Adjustable trimmed splitting knife and suction duct fan and air hose on both sides of waste paper edge.
- Upper knife: Adjustable rising and falling, switch type slitting knife, and paper cutting clearance can be adjusted manually.
- Lower knife: Knife shaft fixed the upper and lower position , and paper cutting clearance can be adjusted manually.
- Fan: 1.5KW motor drive.
-
Y type waste paper edge collection pipe and fixed frame.
Cutting Part:
- Twin knife: Adopt cast iron integrated forming casting, and combine with precision finishing, to have better stability.
- Drive roll: Roller 's surface adopts the expansion texture design and controls the pressurized clip paper of roller through the cylinder.
- Back cutting knife: Made of special alloy steel through precision finishing, thus having long service life; the blade is easy to adjust and calibrate.
- Safety cover: The machine stops automatically when the safety cover is open, so as to guarantee safety.
Man-machine Interface:
- Electrical control system is easy to operate.
- The cutting length, quantity and number of finished products can input directly.
- The actual cutting length and cutting quantity can be displayed in real time.
Static Elimination Equipment:
- Type: Plasma rod type, to eliminate the static electricity on paper.
- Main machine: Efficient static electricity.
- Static elimination rod: Effective discharge range 1700mm.
Paper Conveying Equipment:
- Type: Horizontal multi-stage differential feeding, to produce separation count and paper stacking effect.
- First conveyor section: Quickly separate papers after cutting.
- Second conveyor section: Can be controlled independently or jointly, and adjust the paper to feed out in imbrication type.
- Third conveyor section: speed reduce, prevent paper from impression.
- Paper-out conveyor section: Refined paper separator, can be adjusted by the matched with paper width. pressurized feeding wheel to increase the stability of paper and avoid inclination of paper.
Automatic Paper Alignment and Collection Equipment:
- Type: Hydraulic lifting and stacking collection paper table, descend automatically when the paper stacks to a certain height.
- Maximum effective paper stacking height: 1600mm (including pallet)
- Paper collection size: Width = 1100/1500/1700/1900mm, Length = 1600mm.
- Paper alignment equipment:
- Electric type positive paper alignment mechanism.
- Electric type paper alignment mechanism on both sides.
- Turnover type rear retaining board mechanism.
- Hand-operated and both sides moveable of paper alignment mechanism.
Automatic Counting Label Insert Equipment:
- Type: Accurate counting transverse inserting.
- Function:
- Set the input the number of label in the soft-touch type computer interface, to insert the label according to the set value.
- Sheet replenish function of non-conforming products.
Auto Roll Curtain Delivery Equipment:
- Type: auto curtain delivery
- Function:
- Once one pallet is full, no need to stop machine to take it out. Operator can start auto curtain function help to delivery during exchange pallets.
- Save paper which caused when stop machine.
- Higher efficiency
在线留言
相关产品
地址：
广东省深圳市福田区福田街道岗厦社区彩田路 3069号星河世纪A栋3608H4
手机/ 微信:
COPYRIGHT 2023 © 深圳市德正达进出口有限公司. ALL RIGHTS RESERVED