GM-S1100/1500/1700/1900伺服传动电脑高精密单螺旋卷筒纸分切机-SHENZHEN DZENSTAR MACHINERY CO., LTD.

全球专业的印后/包装/纸品加工设备供应商

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

搜索

GM-S1100/1500/1700/1900伺服传动电脑高精密单螺旋卷筒纸分切机

所属分类：

Product Centre

横切机

关键词：

技术参数
产品详细信息
视频

在线留言

商品名称: GM-S1100/1500/1700/1900伺服传动电脑高精密单螺旋卷筒纸分切机

GM-S1100/1500/1700/1900伺服传动电脑高精密单螺旋卷筒纸分切机

● 主要技术参数:

型号	GM-S1100	GM-S1500	GM-S1700	GM-S1900
切纸型式	上刀回切，下刀固定
纸张范围	60~550gsm	60~550gsm	60~550gsm	60~550gsm
切断长度范围	450~1600mm	450~1600mm	450~1600mm	450~1600mm
切断精度	Cutting length≤1000mm: ±0.5mm; Cutting length＞1000mm: ±0.1%
最高切断米数	350m/min	350m/min	350m/min	350m/min
最高切断刀数	350 Cust/min	350 Cust/min	350 Cust/min	350 Cust/min
最大卷筒纸直径	1800mm	1800mm	1800mm	1800mm
最大卷筒纸宽度	1100mm (45”)	1500mm (59”)	1700mm (67”)	1900mm (75”)
最大堆纸高度	1500mm	1500mm	1500mm	1500mm
气压源需求	0.8Mpa	0.8Mpa	0.8Mpa	0.8Mpa
总功率	22KW	26KW	30KW	35KW
电压	3PH-50HZ-AC380V/220V
总重	11,000kgs	13,000kgs	15,000kgs	17,000kgs
备注	实际产量取决于材料，纸张的重量，以及正确的操作过程。

● 地基安装图:

● 用途及特点:

GM-S1100/1500/1700/1900伺服传动电脑高精密卷筒纸分切机采用德国与英国的先进技术，本机电脑控制系统采用国际顶尖品牌伺服电机及AC变频器、输送带采用日本尼塔（NITTA）、气动振动器采用瑞士菲迪瓦（FINDEVA）、电气系统采用穆勒与欧姆龙，使切纸速度更快且稳定；德国精密轴承及切断刀，切断精度高；轻触式电脑界面控制，操作简单；构造合理的反曲架，保证纸张的平坦，是目前造纸业及印刷业中普遍采用的纸品加工机械。
GM-S系列伺服传动电脑高精密卷筒纸分切设备可以高效完成产品的分切、纵切、修边，同时保证最高的精度和产品质量。 GM-S系列卷筒纸分切设备具有丰富的硬件配置，几乎可以适应任何产品的分切要求。

采用球墨铸铁-QT500-7、原纸架夹臂，特殊工艺铸造，强度高、永不变形，保证原纸架夹臂安全。
采用钢板-Q335,机身墙板精加工制造，强度高，保证机身墙板不变形。
使用NSK进口原装轴承。
使用法国施耐德、日本欧姆龙等进口原件。
分切精度达±0.5mm，机器最高速度达300张/分。
回切刀采用德国镍铬钼金刚材质，精度高，永不变形；刀刃容易调较。
采用自动对角系统，实现工作单的快速对角。
配置首创反曲自动调节装置，保证在调节纸张反曲时快速平整。
送纸部采用预压纸装置，实现纸张不皱纸。
中英文触摸屏操作界面。
采用台湾亚德客气动元件，保障每一个气动动作准确。

局部介绍:

油压无轴原纸架	反曲装置
纸张预压部	对剖和修边气动纵切刀(选配)
单螺旋分切刀	人机操作界面
静电消除设备	纸张输送设备
自动齐纸集纸设备	自动计数标签插入装置

标准配置:

序号	名称	数量
1	高精度单刀切纸机	1 Set
2	纸张棱角自动调正系统	1 Set
3	静电消除设备	1 Set
4	对剖及纸边收集系统	1 Set
5	自动计数标签插入设备	1 Set
6	卷筒纸运输设备（含轨道台车2条）	1 Set
7	自动齐纸集纸设备	1 Set
8	电气操控系统	1 Set
9	驱动马达系统	1 Set
10	随机附属品	1 Set
11	双臂油压无轴式原纸架	1 Set
12	自动导边及张力系统	1 Set
13	自动吸尘器设备	1 Set
14	操作系统：人机界面液晶屏幕	1 Set
15	主传动系统：AC伺服马达	1 Set

● Applications and Characters:

The SMC-D series Smart Servo Precision High Speed Sheet Cutter Machine (Synchro- fly twin knife) can efficiently complete slitting, rip cutting and trimming of products, as well as maintaining the highest precision and product quality.

The SMC-D series Sheet Cutter Machines are well equipped and almost can adapt to all die cutting requirements of products. Paper after cutting is smooth without any powder, can be put on printing machine immediately.
- Adopt nodular cast iron-QT500-7, original paper frame clamp arms casting by special technology process, thus featuring by high strength, never deformation and ensure the safety of original paper frame clamp arms .
- Adopt nodular cast iron-QT600-7, the mainframe wallboard and cutter base has precision manufacturing and high strength , thus will never-deformed .
- The machine uses NSK bearings.
- The machine uses original parts imported from Germany Siemens, Japanese OMRON and Germany Moeller, etc
- Die cutting accuracy reach to ± 0.1mm, the highest speed reaches 440 sheet/min.
- The back cutter is adopt Germany Ni-Cr-Mo metal Tungsten steel material, with high precision and will never- deforms; the knife edge is easy to adjust and calibrate.
- Equipped with the company first-developed anti-curve automatic regulation device, ensure fast and smooth when they adjust of anti-curved paper.
- Paper feeding part adopts pre-pressing device, to ensure that the paper is not wrinkled.
- Equip with touch-screen operation interface in both Chinese and English.
- Adopt Japanese SMC auto tension system and pneumatic components to ensure every pneumatic action performs accurately.
Based on SMC-D series Smart Servo precision Double-helix High Speed Sheet Cutter Machine, this machine equipped with automatic splicer and pallet changer, which enable it realizing fully automatic operation, and embodied the intelligent and efficient technical characteristics of the machine.

❈ Partial Introduction:
Reel Stand, Paper Feeding:
- Max. paper roll diameter: 1800mm
- Max. paper-cutting width: 1100/1500/1700/1900mm
- Min. paper-cutting width : 500mm(20″)
- Paper cylinder diameter: 3″, 6″ or 12″
- Hydraulic drive:
- Tension control system: Pneumatic tension control and swing roll to adjust the pressure arm rise or fall, to control the strength of brake
  
  5.1 Open/close and forward/backward movement of paper roll clamp arms is driven by oil hydraulic cylinder
  
  5.2 Lifting of paper roll clamp arms is driven by oil hydraulic cylinder
- Pneumatic brake brakes, automatic brakes
- Paper guide roll and relevant brackets
Anti-curve Device:
- Type: Adopt motor drive and high-speed adjustment
- Anti-curve device: Anti-curve guide roll adopts patented design and efficient anti-curve treatment
Paper Pre-pressing Part:
- Adopt electric control and inching mode, to make the pressing roll moving vertically, ensure proper positioning of feeding paper, and reduce the phenomenon of paper creping.
Auto Positioning Slitting Part:
- Type: Adjustable trimmed splitting knife and suction duct fan and air hose on both sides of waste paper edge.
- Upper knife: Adjustable rising and falling, switch type slitting knife, and paper cutting clearance can be adjusted manually.
- Lower knife: Knife shaft fixed the upper and lower position , and paper cutting clearance can be adjusted manually.
- Fan: 1.5KW motor drive.
- Y type waste paper edge collection pipe and fixed frame.
Cutting Part:
- Twin knife: Adopt cast iron integrated forming casting, and combine with precision finishing, to have better stability.
- Drive roll: Roller 's surface adopts the expansion texture design and controls the pressurized clip paper of roller through the cylinder.
- Back cutting knife: Made of special alloy steel through precision finishing, thus having long service life; the blade is easy to adjust and calibrate.
- Safety cover: The machine stops automatically when the safety cover is open, so as to guarantee safety.
Man-machine Interface:
- Electrical control system is easy to operate.
- The cutting length, quantity and number of finished products can input directly.
- The actual cutting length and cutting quantity can be displayed in real time.
Static Elimination Equipment:
- Type: Plasma rod type, to eliminate the static electricity on paper.
- Main machine: Efficient static electricity.
- Static elimination rod: Effective discharge range 1700mm.
Paper Conveying Equipment:
- Type: Horizontal multi-stage differential feeding, to produce separation count and paper stacking effect.
- First conveyor section: Quickly separate papers after cutting.
- Second conveyor section: Can be controlled independently or jointly, and adjust the paper to feed out in imbrication type.
- Third conveyor section: speed reduce, prevent paper from impression.
- Paper-out conveyor section: Refined paper separator, can be adjusted by the matched with paper width. pressurized feeding wheel to increase the stability of paper and avoid inclination of paper.
Automatic Paper Alignment and Collection Equipment:
- Type: Hydraulic lifting and stacking collection paper table, descend automatically when the paper stacks to a certain height.
- Maximum effective paper stacking height: 1600mm (including pallet)
- Paper collection size: Width = 1100/1500/1700/1900mm, Length = 1600mm.
- Paper alignment equipment:
- Electric type positive paper alignment mechanism.
- Electric type paper alignment mechanism on both sides.
- Turnover type rear retaining board mechanism.
- Hand-operated and both sides moveable of paper alignment mechanism.
Automatic Counting Label Insert Equipment:
- Type: Accurate counting transverse inserting.
- Function:
  
  Set the input the number of label in the soft-touch type computer interface, to insert the label according to the set value.
  
  Sheet replenish function of non-conforming products.
Auto Roll Curtain Delivery Equipment:
- Type: auto curtain delivery
- Function:
  
  Once one pallet is full, no need to stop machine to take it out. Operator can start auto curtain function help to delivery during exchange pallets.
  
  Save paper which caused when stop machine.
  
  Higher efficiency

在线留言